Down Tension Bar – Stainless Steel

$29.99

In stock (can be backordered)

The TOWNER Down Tension Bar manages your sustain controlling your break angle.

  • BIGSBY® B3
  • BIGSBY® B6 *recommended for ES guitar models.

In stock (can be backordered)

SKU: T-DTB-SS Categories: ,

Description

“The Original Down Tension Bar”

The TOWNER Down Tension Bar manages your sustain controlling your break angle. The TOWNER Down Tension Bar is designed to work with the BIGSBY® B3 or BIGSBY® B6 (recommended for ES guitar models) vibrato tailpieces.

Mounted to the stop tailpiece studs in place of the stop tailpiece, the studs provide the ability to raise or lower the TOWNER Down Tension Bar. Controlling how much downward tension you want on your strings, therefore, managing your guitar strings sustain.

This simple function is ideal and becomes a custom setup for every player with a BIGSBY® vibrato tailpiece because every guitar setup is different. From the gauge of the strings the players likes to use to the action of the strings, type and height of the bridge and type of nut.

*NOTE – CHECK WIDTH of STUD NECK POST:

Measure the neck width of your studs, they should be NO wider than 0.265 inches. If they are wider than 0.265 inches you will need to purchase different tailpiece mounting studs. 

See TOWNER store here for replacements with proper neck post width.

(*The TOWNER Down Tension Bar is designed to fit the neck width of stock GIBSON Guitar stud posts.)

Additional information

Weight 1 oz

BIGSBY Retrofit Systems by TOWNER - Be sure to pickup studs if you DON'T have a Gibson guitar. Dismiss