Your #1 Bigsby Retrofit System by TOWNER includes:
- TOWNER V.BLOCK
- TOWNER Hinge Plate Adaptor
- 2 1/2″ Strap Button Screw
- 4 1/2″ 2-56 Screws
- 4 Felt Pads
TOWNER V.BLOCK with HPA
$39.99 – $57.99
Description
TOWNER V.BLOCK with Hinge Plate Adaptor
(Bigsby B3 ONLY)
• The TOWNER V.BLOCK is designed set the BIGSBY® spring cup back 1/2″ inch from butting up against the stop tailpiece stud.
• The TOWNER V.BLOCK System works best with LES PAUL or short type guitar bodies to mount a BIGSBY® B3 vibrato tailpiece.
• The TOWNER V.BLOCK System works best with LES PAUL or short type guitar bodies to mount a BIGSBY® B3 vibrato tailpiece.
The TOWNER Hinge Plate Adaptor is designed to provide a flat surface for your strap lock or strap button on the BIGSBY® EX-SHORT hinge plate.
The TOWNER Hinge Plate Adaptor slot provides room for exact placement of the BIGSBY®.
The TOWNER Hinge Plate Adaptor and 2 1/2″ strap button screw acts as a retainer holding the BIGSBY® to the guitar body, relieving you from having to drill four extra screws into your guitar.
The TOWNER Hinge Plate Adaptor slot provides room for exact placement of the BIGSBY®.
The TOWNER Hinge Plate Adaptor and 2 1/2″ strap button screw acts as a retainer holding the BIGSBY® to the guitar body, relieving you from having to drill four extra screws into your guitar.
*NOTE – CHECK WIDTH of STUD NECK POST:
Measure the neck width of your studs, they should be NO wider than 0.265 inches, if they are wider than 0.265 inches you will need to purchase different tailpiece mounting studs, likely METRIC studs. Gibson Memphis reissues and Gibson reissues sometimes have wider neck posts, measure to be sure. (*The TOWNER Down Tension Bar is designed to fit the neck width of stock GIBSON Guitar stud posts.)
Additional information
| Weight | 2.4 oz |
|---|---|
| Dimensions | 3 × 2 × 2 in |
| vblock | Aluminum with Hinge Plate Adaptor, Gold with Hinge Plate Adaptor, Aluminum, Gold |
